MINNOW

$329.00

MINNOW

$329.00

The Minnow is a high quality, low noise bass preamp DI pedal equipped with our Bullhead EQ section. This single channel Bullhead preamp features shelving EQ’s for the BASS and TREBLE controls and variable band pass EQ’s for the LO MID and HI MID. A selectable mid frequency for both LO MID and HI MID controls provide complete control over the midrange. We’ve also added HI SHIFT to the treble frequency to further tune the cut/boost capability of the treble control. In addition, the Minnow preamp includes a tuner out for silent tuning and a balanced XLR output for use as a DI, great for both live and studio use.

Minnow Specifications

Pre-Amp: Low noise solid state

Instrument Input: ¼’ Phone with rotary gain control

Input Level Indicator: Signal level and Clip LEDs (green/red)

EQ: 4 Band (12dB Boost/Cut) with switchable Mid

Shelving Bass (80Hz) and Treble (4KHz / 8KHz selectable)

Low-Mid and Hi–Mid -Variable Gain, Band Pass EQ with selectable frequency/bandwidth options

Master Volume: Rotary Control

EQ On/Off Footswitch

Mute Footswitch

Tuner Out: ¼” Phone jack

Amp Out: ¼” Phone jack

Direct Out: 600 Ohm Balanced XLR, Pre/Post, and Ground Lift

Power Supply (Not Included): Switch-Mode Power Supply, Output 12V (0.5A)

Power Consumption: 150mA

Chassis: Steel

Removable Rubber Feet: Adhesive backed

Size:

(H x W x D in.) 6.05″ x 4.85″ x 1.73″
(H x W x D mm) 153.8mm x 123.4mm x 44.1mm

Weight: 1.81 lbs.

Read or Download the manual

The Minnow is a high quality, low noise bass preamp DI pedal equipped with our Bullhead EQ section. This single channel Bullhead preamp features shelving EQ’s for the BASS and TREBLE controls and variable band pass EQ’s for the LO MID and HI MID. A selectable mid frequency for both LO MID and HI MID controls provide complete control over the midrange. We’ve also added HI SHIFT to the treble frequency to further tune the cut/boost capability of the treble control. In addition, the Minnow preamp includes a tuner out for silent tuning and a balanced XLR output for use as a DI, great for both live and studio use.

Minnow Specifications

Pre-Amp: Low noise solid state

Instrument Input: ¼’ Phone with rotary gain control

Input Level Indicator: Signal level and Clip LEDs (green/red)

EQ: 4 Band (12dB Boost/Cut) with switchable Mid

Shelving Bass (80Hz) and Treble (4KHz / 8KHz selectable)

Low-Mid and Hi–Mid -Variable Gain, Band Pass EQ with selectable frequency/bandwidth options

Master Volume: Rotary Control

EQ On/Off Footswitch

Mute Footswitch

Tuner Out: ¼” Phone jack

Amp Out: ¼” Phone jack

Direct Out: 600 Ohm Balanced XLR, Pre/Post, and Ground Lift

Power Supply (Not Included): Switch-Mode Power Supply, Output 12V (0.5A)

Power Consumption: 150mA

Chassis: Steel

Removable Rubber Feet: Adhesive backed

Size:

(H x W x D in.) 6.05″ x 4.85″ x 1.73″
(H x W x D mm) 153.8mm x 123.4mm x 44.1mm

Weight: 1.81 lbs.

Read or Download the manual

Minnow Features

1. Out: 1/4” phone jack routes the signal to the destination device

2. Tuner Out: 1/4” phone jack sends signal to tuner. Stays active while in mute

3. Ground / Lift Switch: Ground lift dedicated to Direct Out

4. Direct Out XLR: Balanced XLR connection

5. Direct Out Pre/Post select switch: Switches between a Pre‐EQ or Post‐EQ send

6. In: Instrument input 1/4” phone plug line input

7. DC In: AC mains input with power on/off LED indicator. Attach cable firmly into socket. 12V 500mA Center Negative, illuminated blue LED indicates power is on. No light means power is off

8. Gain with level indicator: Input level adjust, green LED indicates signal and red LED indicates a clip

9. Lo Mid frequency select: Selects the frequency for the Lo Mid bandpass EQ

10. Bass shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

11. Lo Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

12. On footswitch: Engages EQ

13. Master: Controls the overall output volume

14. Hi Mid frequency select: Selects the frequency for the Hi Mid bandpass EQ

15. Treble shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

16. Hi Shift: Treble frequency shelving shift button, Out is low (4kHz), In is high (8kHz)

17. Hi Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

18. Mute footswitch: Mutes all outputs except the tuner out

Minnow Features

1. Out: 1/4” phone jack routes the signal to the destination device

2. Tuner Out: 1/4” phone jack sends signal to tuner. Stays active while in mute

3. Ground / Lift Switch: Ground lift dedicated to Direct Out

4. Direct Out XLR: Balanced XLR connection

5. Direct Out Pre/Post select switch: Switches between a Pre‐EQ or Post‐EQ send

6. In: Instrument input 1/4” phone plug line input

7. DC In: AC mains input with power on/off LED indicator. Attach cable firmly into socket. 12V 500mA Center Negative, illuminated blue LED indicates power is on. No light means power is off

8. Gain with level indicator: Input level adjust, green LED indicates signal and red LED indicates a clip

9. Lo Mid frequency select: Selects the frequency for the Lo Mid bandpass EQ

10. Bass shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

11. Lo Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

12. On footswitch: Engages EQ

13. Master: Controls the overall output volume

14. Hi Mid frequency select: Selects the frequency for the Hi Mid bandpass EQ

15. Treble shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

16. Hi Shift: Treble frequency shelving shift button, Out is low (4kHz), In is high (8kHz)

17. Hi Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

18. Mute footswitch: Mutes all outputs except the tuner out

You may also be interested in
Menu